How to setup your Camera System- with premade cables

0
1490

How to setup your Camera System

camera systemcamera system

Step 1: Unpack
Take out all of the components from the boxes. These should be your Cameras, DVR, Power supply, BNC cables

http://www.jewellyJennys.com/ebay/faq/images/step2.jpg

Next, using a Phillips head screwdriver connect the ends of each DC cord to the circuit board of the power supply.

For All BLACK wires with WHITE STRIPE:
BLACK w/ WHITE STRIPE = POSITIVE
SOLID BLACK = NEGATIVE

http://www.jewellyJennys.com/ebay/faq/images/blackonwhitewire.jpg

For All RED WIRES with a BLACK STRIPE:
RED w/ BLACK STRIPE = NEGATIVE
SOLID RED = POSITIVE

http://www.jewellyJennys.com/ebay/faq/images/redonblackwire.jpg

Lastly, after all of the DC cords are connected to the circuit board pull the ends out through the back hole of the power supply box (Figure 2-5) and plug in your Power supply to a wall outlet (Figure 2-6).

http://www.jewellyJennys.com/ebay/faq/images/step2c.jpg

Step 3: Connecting your cameras to DVR and power supply
To connect your cameras to the DVR and Power supply you will need to use BNC cables (Figure 3-1). *Note:You should have one bundle of BNC cables per camera.

http://www.jewellyJennys.com/ebay/faq/images/step3.jpg

Connect your camera to the BNC cable (Figure 3-2 & Figure 3-3)

http://www.jewellyJennys.com/ebay/faq/images/step3b.jpg

Next, connect the opposite end of the BNC cable to the back of the DVR Video In (Figure 3-4).

http://www.jewellyJennys.com/ebay/faq/images/step3c.jpg

Lastly, connect the BNC cable to the Power supply DC cord. (Figure 3-5).

http://www.jewellyJennys.com/ebay/faq/images/step3d.jpg

Step 4: Connecting your router to the DVR
Connect your network cable from your router (Figure 4-1) to the back of the DVR (Figure 4-2).

http://www.jewellyJennys.com/ebay/faq/images/step4.jpg

Step 5 (Optional): Connecting a PTZ camera to the DVR
Use a very small Phillips Head screw driver to attach the red (POSITIVE) cable to the “A” box and the black (NEGATIVE) cable to the “B” box.

http://www.worldeyecam.com/store/skin_new/images/dvrs/ptzsetup.jpg

This completes the physical setup process!