DVR remote view setup-att uverse modem firewall by DVRunlimited

0
1897

DVR remote view setup-att uverse modem firewall

att uverse modem firewallatt uverse modem firewallatt uverse modem firewallatt uverse modem firewallatt uverse modem firewallatt uverse modem firewallatt uverse modem firewall

 

Most ATT&T u-verse has a gateway 192.168.1.254

user name- admin

password – the number on the device labeled access code

go to advance and firewall setting and then find the mac address of your DVR  from the list of all the devices and click on it.,

The mac address for the DVR can be easily found in the information page on your DVR setting

add the device rules, name, starting port ,ending port.

then add the the name you created to the right side by clicking on the arrow.

one more step then you all done,

under ip allocation

find your device and allocate the address to it.

for example your DVR ip address is 192.168.1.67, so you select 192.168.1.67 from the list and save the setting.

restart your modem .You just type ipchicken.com or whatismyip.com to find your public ip address. use the ip on the screen  for example 69.103.69.24 to connect.

read my other blog post for dynamic host   setup

Static IP address from the ISP , you do not need to spend extra every month, dvrunlimited.com will guide you to set up your DVR without a static IP address from ISP