Update firmware for Standalone DVR

0
1327

Click on the links below to download the firmware and kernel. First, you need to upgrade the kernel before you can upgrade the firmware. The procedures are written below.
Download link: http://www.ltsecurityinc.com/en_us/site/downloadFile?id=449

UPGRADE Instruction:

Part A Flash Upgrade.

  1. Click on the flash download link to download the flash package file.
  2. Then, open  the flash file using WinRar program and extract all files inside the flash folder into a clean USB flash drive.
  3. Turn off the DVR, and then plug the USB flash drive to the DVR USB port. Then, turn on the DVR.
  4. Wait for the DVR to complete the flash upgrade.

Note: During the upgrade process, the DVR will not show anything on the display monitor, and DO NOT unplug the USB flash drive. This process takes about 10-15 minutes. When the upgrade is completed, DVR will boot to normal stage.

Part B

DVR Firmware Upgrade.

  1. Click on the firmware download link to download the firmware file.
  2. Then, copy the firmware or save into the USB flash drive.
  3. Go to DVR Main Menu -> Upgrade -> select the DVR firmware in the flash drive directory, and then click on UPGRADE; click OK when it prompt with a pop-up windows.
  4. Wait for the DVR to complete the upgrade, will take up to 10 minutes.

Note: During the upgrade process, the DVR will not show anything on the display monitor, and DO NOT unplug the USB flash drive. This process takes about 10 minutes. When the upgrade is completed, DVR will boot to normal stage.

If the open link prompt you to login, type “common” as username and password.