How to Set Up PTZ Controller

0
609
Once the unit boots up, press “Enter” and enter your credentials in order to access the settings, the factory username is “admin” and the password is “888888”
Now you have two options. One is zone control, which you can control the PTZ. The other is Menu Settings.

Next you want to go to DHCP.

Now, you can set up your own IP address.

In order to add a camera, select “Zone” and create a name for the camera. 

You can set “Type” to whatever you want. Here, we use “DVR”. 

Then enter the camera’s static IP address. 

After that, set the user name and the password. Press “Enter to add the camera.

Then go to “Zone control” in order to control the camera.

Finally, go to “zone control” and now you are able to control the camera.